KTM
KTM

2019 KTM 250 XC-F

Brochure

Starting At:$9,499.00*

2019 250 XC-F Overview & Specs

Engine
Engine Type1-cylinder, 4-stroke
Displacement249.9 cm³
Bore and Stroke78 mm x 52.3 mm
Fuel SystemKeihin EMS
Chassis
Front SuspensionWP-USD, AER 48, Ø 48 mm
Front BrakesDisc brake
Rear SuspensionWP shock absorber with linkage
Rear BrakesDisc brake
Transmission
Transmission6-speed
Final DriveChain: 5/8 x 1/4 in.
* Price shown is based on the manufacturer's suggested retail price (MSRP) and is subject to change. MSRP excludes destination charges, optional accessories, applicable taxes, installation, setup and/or other dealer fees.


Small-Bore Domination: Already known for its strong performance, 250 XC-F presents itself with a highly developed engine built into a race-bred chassis. The performance combination of a powerful and torquey engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future.

Engine & Exhaust
  • The KTM 250 XC-F engine is known to be the strongest engine in the 250cc class. It screams at the top of its lungs at 14,000rpm, but is equally happy producing tons of torque and power across the rest of the rev range. Its compact architecture contributes to an excellent mass centralization, supporting the rideability of the bike. And it only weighs 47.6 pounds. That's including the incredibly beneficial E-starter.
  • Cylinder head: The centerpiece of the compact DOHC (double overhead camshaft) engine is the cutting-edge cylinder head. It features two overhead camshafts, which activate the titanium valves via super-light cam followers with a hard DLC coating.
  • Crankshaft: The KTM 250 XC-F's crankshaft utilizes a short connecting rod, which makes for an overall compact and lightweight engine with a snappy power delivery. A plain big (bottom) end bearing with two force-fitted bearing shells runs directly on the crank pin. The necessary oil feed for this bearing is ensured by the engine's pressurized lubrication. This design is a decisive benefit in terms of the crankshaft service interval, which can be lengthened due to the plain bearing. So just pin it, all day long.
  • Crankcases and engine covers: The design of the die-cast crankcases allows for minimal weight and a very centralized shaft configuration. This makes the engine short and compact, while contributing to an efficient centralization of masses. The engine covers also feature a solid surface structure, which reduces the wear caused by the rider's boots. This way, your XC-F will keep looking better longer.
  • Transmission: The reliable 6-speed semi-close transmission features a special surface treatment on the 2nd, 3rd and 4th gears for solid reliability. The advanced ´No Dirt´ gear shift lever design prevents dirt from jamming the joint of the lever and guarantees precise shifting even in the muddiest conditions. All 4-stroke XC-F engines are fitted with a gear position sensor for tailored engine mapping for each gear. For 2018, the transmission shaft gets a new C4 bearing that has a bigger overlap in the case. This means reliability even under extremely hard conditions.
  • Engine management system: The state-of-the-art Keihin engine management system with electronic fuel injection features a 44mm throttle body. Thanks to its unique injector position, the engine's response is instantaneous. And to make life even easier, separate systems for cold starts and idle adjustment await you. The lightweight control unit features a unique traction and launch control system for lightning-quick response when the gate drops.
  • Cylinder and piston: Inside the short cylinder, with a bore of 78mm, thumps a box-type piston made by CP. Its crown geometry is adapted perfectly to the high-compression combustion chamber, where its rigid structure and low weight shine. Thanks to the low oscillating masses, the engine is as snappy as it is strong.
  • Balancer shaft: The side-mounted balancer shaft does double duty also driving the water pump. Thanks to its perfect balance and low oscillating masses, engine vibration is kept to a minimum.
  • Clutch: The KTM 250 XC-F employs the KTM-developed CSS clutch (coil spring steel) with a robust steel basket and extremely heat resistant clutch plates and new, nitrated steel liners reducing the wear. Light operation and telepathic amounts of control are standard with this hydraulic Brembo actuated clutch.
  • Cooling: KTM's proven cooling system routes the coolant from the cylinder head through the frame triangle, directly to aluminum radiators made by WP. Thanks to flow optimized internal circulation and CFD-calculated ventilation, the system is superbly efficient. In addition, new radiator protections improve heat dissipation. Especially in the mud. They are also integrated into the front part of the shrouds to protect the radiators in a crash.
  • E-Starter: The KTM 250 XC-F is fitted with a unique E-starter as standard, which is a clear advantage when it comes to crunch time in the heat of battle. A strong starter motor made by Mitsuba will fire time and time again at the push of a button. Even under extreme conditions, thanks to its more heat resistant O-ring.
Chassis Features
  • KTM engineers just love dropping weight year after year. The result: the 2018 KTM XC models are the slimmest, lightest dirt bikes out there. Even though the 4-strokes are equipped with an E-starter as a standard feature, while the heavier competition still needs to be kickstarted. You can just focus on kicking ass.
  • Frame: The high-tech, lightweight chrome-moly steel frame has a knack for easy handling, outlandish rideability, precise cornering and excellent stability. You can also count on high torsional rigidity and low longitudinal stiffness. This results in better absorption of the energy created from the front and rear suspension, sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight aluminum engine head stays (the connection between cylinder head and frame) contribute to more precise cornering and a reduced vibration level. The engineers were able to pull off all that, while making their frame 2.2 pounds lighter than that of the lightest competitor on the market. In addition, it is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light subframe made of aluminum, which tips the scales at less than 2 pounds.
  • Swingarm: The cast aluminum design offers low weight and a perfect flex behavior. The single-component casting process eliminates any inconsistencies and inherent weak points created by welding. It's better looking too.
  • Wheels: The 250 XC-F is fitted with lightweight, CNC-machined hubs, high-end Giant rims and black spokes with lightweight aluminum nipples providing maximum stability at minimum weight. The latest Dunlop Geomax AT81 tires guarantee perfect traction and outstanding performance.
  • Front suspension: The lightweight WP AER 48 front fork, a 48mm USD air-sprung fork developed by WP in close collaboration with KTM, is a split fork with separate functions for each leg. That means damping functions are on the right side, whereas the air spring is in the left. This left leg features a 2-chamber system with a capsuled air cartridge to prevent loss of air pressure. Should the outer seal start to leak, the internal cartridge pressure will keep the bike in position. The air spring is easy to adjust to any rider weight via a single air valve. No extra special tools are required; the fork air pump is supplied with the bike. The right fork leg integrates a damping cartridge that tailors to all your damping needs. It can be adjusted to the track conditions and the rider's preferences with a twist of a dial (compression from the top, rebound from the bottom, 30 clicks each). Right off the dealer floor, this fork (with reworked damping characteristics) is more comfortable and more sensitive than ever. But you can still hammer the hell out of it.
  • Rear suspension: The WP shock absorber has been developed with the entire frame and swingarm architecture in mind, including the linkage system and the WP AER 48 front forks. It features machined and black anodized components and is a valuable, high-end product compared to roughcast reservoirs. A new, confidence inspiring setting with improved damping characteristics perfectly matches the front-end set-up and its WP color scheme lets everyone know you have excellent taste in suspension.
  • Triple clamp: Top quality, CNC machined triple clamps have been a KTM trademark for years to ensure precise handling. The rubber damped handlebar fixation allows for two positions and an hourmeter is fitted in order to let the rider know it's time for a service.
  • Brakes: These high-tech Brembo babies are combined with lightweight Wave brake discs. You couldn't brake any harder, better, faster or stronger.
  • Fuel tank: All XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel pump system and capacity of 2.25 gallons. Inside threads on the filler cap make for an easy and reliable closure.
  • Airbox: The air filter box design offers maximum protection of the air filter against soiling, while ensuring maximum airflow. The large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you could still pop a fresh one in with a face full of mud. Without tools. In seconds.
Ergonomics & Comfort
  • READY TO RACE ergonomics give you the edge on all terrain, ride harder for longer.
  • Handlebar: KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum, is fixed in damped rubber mounts and has two different positions. ODI lock-on grips make grip changes easy and do not require any wire or glue to be secured.
  • Footpegs: Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the 2018 EXC models, which are 6mm higher than the SX versions.
  • Seat: Ergonomically perfect, the seat has a high foam volume, which offers great comfort and durability, while keeping the weight low.
Bodywork & Graphics
  • KTM R&D, KISKA Design and all our factory riders had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the XC-F. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer.
  • Decals: A new, tailor-made kit and a Factory orange frame. Because in this sport, champs deserve to look the part regardless of the dirt.
Software & Electronics
  • The latest technology, reduced to the minimum: READY TO RACE
  • Battery & wiring harness: A strong new lithium ion battery breathes life into the engine and contributes to low vehicle weight. The lightweight battery and wiring harness are centralized in a compartment above the air filter box, allowing the mechanic to remove the subframe without moving the electronics. A happy mechanic is a good mechanic.
Engine
  • Design: 1-cylinder, 4-stroke engine
  • Displacement: 249.9 cm³
  • Bore: 78 mm
  • Stroke: 52.3 mm
  • Starter: Electric starter
  • Transmission: 6-speed
  • Clutch: Wet, DDS multi-disc clutch, Brembo hydraulics
  • EMS: Keihin EMS
Chassis
  • Frame design: 25CrMo4 steel central-tube frame
  • Front suspension: WP-USD, AER 48, Ø 48 mm
  • Rear suspension: WP shock absorber with linkage
  • Front brake: Disc brake
  • Rear brake: Disc brake
  • Front brake disc diameter: 260 mm
  • Rear brake disc diameter: 220 mm
  • Chain: 5/8 x 1/4"
  • Steering head angle: 63.9 °
NOTES:
The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that mistakes, printing, setting and typing errors may occur; such information is subject to change without notice. No rights may be derived from incorrect statements.

Compare Models

 






   
Year2019  
ManufacturerKTM  
Model250 XC-F  
StyleOff-Road  
Price$9,499.00  
Chassis
Front SuspensionWP-USD, AER 48, Ø 48 mm  
Front BrakesDisc brake  
Front Tire   
Rear SuspensionWP shock absorber with linkage  
Rear BrakesDisc brake  
Rear Tire   
Dimensions
Dry Weight   
Fuel Capacity   
Wheelbase   
Ground Clearance   
Seat Height   
Trail   
Rake   
Engine
Engine Type1-cylinder, 4-stroke  
Displacement249.9 cm³  
Bore and Stroke78 mm x 52.3 mm  
Cooling   
Compression Ratio   
Fuel SystemKeihin EMS  
Ignition   
General
Colors   
Warranty   
Transmission
Transmission6-speed  
Final DriveChain: 5/8 x 1/4 in.  

Current Promotions

All Brands
backpausenext
Promo x of x
  • All Brands
Loading...

Save & Email Listing

Can't see this image?  Try refreshing by clicking on the refresh icon.Refresh CAPTCHA

Your privacy is important to us. We will not contact you without your consent to receive offers, other than to provide you with the link to your saved listing.

*Required Fields
Hours
Mon-Fri10:00 a.m.6:00 p.m.
Sat10:00 a.m.3:00 p.m.
SunClosed

Easily find the OEM parts that fit your vehicle

or search by...